For assessors & buyers

Technical Summary for Third-Party Assessors.

Improved Cooking Madagascar. Verified technical parameters for accurate project assessment.

For assessors and prospective buyers. This document sets out verified technical parameters for the Improved Cooking Madagascar project. SaniTap requests that any third-party assessment of this project references this summary and is conducted with direct access to the project documentation listed below. Please contact us before commencing any assessment.

The Improved Cooking Madagascar project distributes high-efficiency improved cookstoves in Toliary Province, Madagascar, generating verified emission reductions through reduced firewood and charcoal use. This summary sets out the five technical areas most critical to accurate project assessment. Supporting documentation is available on request.

Gold Standard Registry. PoA GS12600; VPAs GS12851, GS23369, GS23370, GS23409. Updated April 2026.

01
Carbon methodology

GS TPDDTEC V4.0, confirmed CCP-eligible.

CCP confirmed

The project applies GS Technologies and Practices to Displace Decentralised Thermal Energy Consumption (TPDDTEC) Version 4.0. This is a Gold Standard methodology confirmed as a CCP-eligible category by the ICVCM when certain requirements are met.

Assessors should note that this project does not use the GS Methodology for Metered & Measured Energy Cooking Devices (MMECD) in any version. MMECD is a distinct methodology. Any assessment referencing MMECD v1.0 or v1.2 in relation to this project is methodologically incorrect, and all findings derived from it are invalid.

Methodology
GS TPDDTEC V4.0
CCP status
Confirmed CCP-eligible by the ICVCM
Registry
Gold Standard, PoA GS12600; VPAs GS12851, GS23369, GS23370, GS23409

Full project PDD and methodology selection documentation available on request.

02
Carbon accounting, fNRB

Fraction of non-renewable biomass: 54%.

Subnational

The project applies a subnational fraction of non-renewable biomass (fNRB) value, set out in A6.4-MEP012-A04, Fraction of Non-Renewable Biomass V2, derived from the MoFuSS model (Modelling Fuelwood Saving Scenarios). This is the methodologically correct value for a project operating in a defined subnational geographic area. The A6.4-MEP012-A04 tool explicitly states that for fuels produced and consumed in geographically narrower regions, a subnational value is more appropriate.

fNRB applied
54%, Toliary Province (subnational)
Source
MoFuSS subnational model, referenced in project ICS 17

Fraction of non-renewable biomass calculation and MoFuSS references available on request.

03
Monitoring approach

Continuous digital stove monitoring, third-party operated.

Operational

A third-party contractor has been engaged specifically to conduct continuous digital monitoring of stove usage using dedicated stove monitors. This is operational, not a planned measure.

Monitoring method
Continuous digital stove monitors, third-party contractor
GS classification
Data sensors, first in the Order of Preference in the CDM Sampling and Survey Guidelines V4, and best-practice monitoring under s2.4 GS Usage Rate Guidelines V2

The project's monitoring approach represents best practice under TPDDTEC V4.0 guidelines. Any assessment characterising this project as relying solely on sales records, or as lacking active monitoring, is factually incorrect.

Third-party monitoring contractor engagement records and stove monitor deployment data available on request.

04
Safeguarding & community engagement

Full FPIC documentation, gender-responsive programme.

Documented

The project holds comprehensive safeguarding and FPIC documentation. No assessment of safeguarding should be completed without direct access to this material.

  • A summary of FPIC, stakeholder engagement and legal ownership of emission reductions is set out in the PDDs.
  • Complete FPIC records for each household, including specific consent records and participation rates from all initial consultations.
  • Documented mechanisms for ongoing consent as the project scales across the project area.
  • A qualified gender expert is contracted to conduct gender-responsive workshops, focus groups and ongoing monitoring.
  • Multiple engagement channels: face-to-face visits, customer booklets with direct contact details, a Facebook channel, a confidential email channel, and the Gold Standard contact mechanism.
  • Carbon rights transfer documentation provided in French and Malagasy at the point of stove distribution.

Assessors who have not had direct access to the project's safeguarding documentation should not assign risk ratings on this basis. SaniTap will make all FPIC records, gender expert reports and engagement logs available on request prior to any assessment.

Full FPIC documentation, gender expert contract and activity reports, and engagement channel records available on request. See the FPIC explainer.

05
Government authorisation & CORSIA

Letter of Approbation held, verification underway.

In progress

The project's authorisation status should be understood within the structure of Madagascar's Article 6 framework, in which a Letter of Authorisation (LoA) cannot be issued until verification is complete. This is a structural feature of Madagascar's framework, not a project deficiency. To date, the Government of Madagascar has provided 23 LoAs, demonstrating that the country participates in international carbon markets.

Letter of Approbation received
Formal first step in Madagascar's LoA process, confirms active government support
Third-party verification underway
Required precondition for LoA issuance under Madagascar's Article 6 framework
Letter of Authorisation
To follow verification. Madagascar has issued 23 LoAs to other projects, demonstrating the system is functional
CORSIA eligibility
Project meets ICAO eligibility criteria. LoA required to trade under CORSIA
CCP labelling
Application to follow registration and verification, process in progress

Letter of Approbation and ICVCM CCP-eligible confirmation available on request. See the Madagascar Article 6 authorisations register (UNFCCC), the CORSIA position, and the integrity stack.

06
Documentation

Request project documentation.

SaniTap will provide full access to project files, including the PDD, ICS calculations, FPIC records, monitoring data and the Letter of Approbation, to any legitimate assessor or prospective buyer prior to commencing a review.